Salt Cell Saver - Pool - 1L

SALT CELL SAVER
SALT GENERATOR CELL CLEANER
30-21260

PHOSPHATE-FREE
SALT CELL SAVER is formulated for cleaning salt generator cells without causing any harm to the cell plates.
SALT CELL SAVER is used by a soaking process and will restore conductivity and efficiency by eliminating scale build-up.

A TOUCH OF NATURE FOR POOL WATER
1. Remove the cell according to the manufacturer’s instructions.
2. Rinse the cell to remove excess debris.
3. Place the cell upright into a pail, covered with the SALT CELL SAVER solution. Allow to soak for a minimum of 20 to 30 minutes, then remove cartridge from the solution.
4. Rinse cartridge immediately with fresh water.
5. Re-install the cell according to the manufacturer’s instructions.

PRECAUTIONS:
CAUSES BURNS.
DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS.
Do not mix with any other chemical.
Do not swallow.
Do not get in eyes or on skin or clothing.
Do not breathe fumes.
Keep out of reach of children.
Wear gloves and safety glasses.
Use only in a well-ventilated area.
Keep container closed and store in a cool location.

Warning:
KEEP OUT OF REACH OF CHILDREN.
DO NOT INDUCE VOMITING.
AVOID ALL CONTACTS WITH SKIN, EYES AND CLOTHING.
CALL A PHYSICIAN OR THE POISON CENTRE IF NECESSARY.
TELEPHONE NUMBERS FOR POISON CENTERS:
QC: 1-800-463-5060 ON: 1-800-267-1373
BC: 1-800-567-8911 NF: 1-709-722-1110